吉林大学化学学院研究生课程思政的多维度构建与探索*

研究生课程思政的建设影响着研究生的培养质量,关乎着能否实现立德树人这一人才培养的根本任务。介绍了吉林大学化学学院立足学科特点,在研究生课程思政建设方面取得成功的经验,并对未来的课程思政建设方向进行了探讨。     

烧结温度对Cao.9(NaCe)0.05Bi2Nb2O9无铅压电陶瓷性能的影响

采用传统固相反应法制备了Ca0.9(NaCe)0.05Bi2 Nb2 O9铋层状无铅压电陶瓷.采用XRD、SEM、EDS及相关电学性能测试系统表征了样品的晶体结构、断面形貌、元素组成以及介电、压电、铁电等性能,探究不同烧结温度对于陶瓷性能的影响.结果表明:当烧结温度为1150℃时,样品的晶体结构单一均匀,呈现片层状结构,致密性较好,压电常数高达17 pC/N,介电损耗仅为0.42;,居里温度为908℃,并且具有很好的温度稳定性,说明固相反应法制备的Ca0.9(NaCe)0.05Bi2Nb2O9压电陶瓷最佳烧结温度为1150℃.     

Metabolomic analysis of raw Pinelliae Rhizoma and its alum‐processed products via UPLC–MS and their cytotoxicity

Alum‐processing is a traditional method to attenuate the toxicity of Pinelliae Rhizoma (tubers of Pinellia ternate, PT). The present study aimed at investigating the chemical and cytotoxic changes during alum processing. Metabolomic profiles of raw and alum‐processed PT were studied based on ultra‐performance liquid chromatography coupled with Orbitrap mass spectrometry. More than 80 chemicals in positive MS mode and 40 chemicals in negative MS mode, such as organic acids, amino acids, glucosides and nucleosides, were identified after multivariate statistical analysis, including principal component analysis and orthogonal partial least‐square discriminant analysis. Almost all of the identified chemical markers were significantly decreased ~10‐ to 100‐fold after alum processing. Meanwhile, the correlations between the chemical markers were assimilated to a positive coefficient from disorderly distribution during the processing. Raw PT extracts could inhibit the proliferation of human carcinoma cells (HCT‐116, HepG2, and A549) at the rate of 40.5, 24.8 and 31.6% more strongly than processed PT. It was concluded that the alum processing of PT could decrease the number of actively water‐soluble principles at the same time as decreasing toxicity. Given the water‐insoluble property of toxic calcium oxalate raphides in PT, we suggest that a more scientific processing method should be sought.     

一致分数阶非线性微分方程的精确解

同时考虑了Kudryashov方法和Khalil一致分数阶变换,构造了求解一致分数阶非线性微分方程精确解的新方法,并将其用于求解时间-空间一致分数阶Whitham-Boroer-Kaup方程,得到了Whitham-Boroer-Kaup方程新的精确解,验证了该方法的有效性和可行性.     

一种新型双吡啶悬臂Mn(Ⅱ)配合物的合成、晶体结构及DNA结合能力研究

通过3,3′-((乙烷-1,2-二基双(2-甲基吡啶杂氮二基)双(亚甲基))双(2-羟基-5-甲基苯甲醛)与2-羟基-1,3-丙二胺的缩合反应得到一种具有双吡啶悬臂的双核锰配合物。通过X射线单晶衍射确定了该配合物结构,结果显示其分子式为[Mn₂(C₃₇H₄₃N₆O₆)]·(ClO₄)₂。该配合物属于单斜晶系,P2₁/c空间群,晶胞参数为:a=1.096 50(19) nm, b=1.419 5(3) nm, c=3.109 4(5) nm, β=108.153(5)°。进一步分析表明两个二价锰离子分别与(N_amine)₂(N_imine)₂O₃和(N_imine)₂O₄体系配位,它们与配位原子形成的几何构型分别是十面体和扭曲的八面体。两个中心锰离子距离为0.331 6 nm,由酚氧原子和醋酸根共同桥联。另外,本文也利用伏安法和黏度法对该配合物与小牛胸腺DNA的结合能力进行研究,实验结果表明它们之间的结合方式为弱的插入作用。     

基于CARS技术的超燃冲压发动机点火过程温度测量

相干anti-Stokes Raman散射（coherent anti-Stokes Raman scattering，CARS）技术作为一种非接触测量手段，已广泛应用于多种发动机模型燃烧室温度测量及地面试验.然而，目前的工作主要集中在稳态燃烧场温度的测量，缺乏用高分辨率的单脉冲来测量瞬变的燃烧火焰温度及组分浓度的研究.基于CARS理论，结合多参数拟合算法，开发了基于MATLAB的CARS光谱计算和拟合程序CARSCF；利用McKenna平面火焰炉在不同工况下进行了温度测量，并与DLR测量结果进行对比，结果显示开发的CARSCF具有较高的测量重复性和准确性；最后将CARS技术应用于测量超燃冲压发动机点火过程中的温度测量，获取了点火过程中的温度.结果显示，在来流Mach数为3的条件下，H₂/air点火过程中温度呈现急剧上升然后缓慢下降，而CARS信号则呈现急剧上升然后急剧下降随后又缓慢上升的趋势，并且在点火过程中最高温度为1 511 K.      

铜基/氧化锆催化剂的应用及改性研究进展

ZrO2具有弱酸碱性、氧化还原性、良好的热稳定性和机械强度,在催化领域得到广泛应用。以Zr O2为载体的铜基催化剂因其活性高,选择性好,性能稳定,受到越来越多的关注。本文介绍了Cu/Zr O2催化剂在醇类的水蒸气重整制氢、CO/CO2加氢合成低碳醇、二乙醇胺脱氢、乙醇直接合成乙酸乙酯和低温水煤气变换方面的应用。综述了添加不同助剂对Cu/Zr O2催化剂物化及催化性能的影响。